Spare parts Bezzera Magica

On this page you will find specific parts of the Bezzera Magica. The machine is equipped with an E61 group. All parts for the E61 group can be found on this page, the filters on this page and for the filter holder on this page. 

  • Gasket steam tip
    Gasket steam tip

    6x1,2 mm for INOX steam tips with male thread

    € 0,45
  • 0.5mm filterholder gasket shim
  • O-ring fitting steam tap Bezzera
    O-ring fitting steam tap Bezzera

    This O-ring fits the fitting for the push tap of Bezzera. (Gasket between front panel and tap)

    OR0114

    All Bezzera models from 29/01/2014r29/01/2014

    7496052

    € 0,75
  • O-ring steam pipe - steam tap universal
    O-ring steam pipe - steam tap universal

    OR between the nut of the knee joint of the steam/water pipe and the steam tap. There is also a teflon gasket available.

    16 X 2 MM

    € 0,75
  • Spring filterholder 58mm
    Spring filterholder 58mm

    For all machines with a 58mm filter (inner diameter = tamper diameter)

    Replace this spring when your filters fall out the portafilter.

    For E61 machines, Bezzera BZ series, QuickMill, Rancilio, Gaggia, Vibiemme, Marzocco, Cimbali…

    € 0,75
  • O-ring steampipe universal
    O-ring steampipe universal

    This ring is located at the bottom of the nut of the connection of the steam tap and fits in with many models of espresso machines. If the steam or water pipe moves stiffly, or if it leaks at the knee joint, replace this ring. We…

    € 0,95
  • Pump bend
    Pump bend

    Angled coupling for an Ulka pump or output of a solenoid valve or OPV.

    Lelit MC017

    QuickMill GO3000PG

    € 0,95
  • Rubber steampipe 10mm
    Rubber steampipe 10mm

    Prevent burnt fingers with this rubber cover for the steam pipe. For steam pipe with an outer diameter of 10 mm, tip for assembly: use a little bit of washing-up liquid so that the cover easily goes over the thickening of the…

    € 1,25
  • Lubricant for filter holder (Portion)
    Lubricant for filter holder (Portion)

    With this special Molicote paste you lubricate your filter holder and group. Put the past under the ears of the filter holder and then you turn the filter holder into the brew group so that paste also comes in the tread. The paste…

    € 1,50
  • O-ring water tank Bezzera
    O-ring water tank Bezzera

    OR112 for Bezzera water tanks

    € 1,50
  • Pump suport Ulka
    Pump suport Ulka
    € 1,50
  • Screw collector watertank ECM / Bezzera
  • Closing gasket Bezzera push tap
    Closing gasket Bezzera push tap

    For Bezzera taps with quick/push steam tap

    11x4x4

    BZ 5496042

    € 1,75
  • Closing gasket OPV Bezzera (new model)
    Closing gasket OPV Bezzera (new model)

    Closing gasket for adjustable overpressure valve Bezzera.

    11 x 3 mm

    BE 5493042

    For Bezzera E61 machines > 30-10-2012

    For Bezzera BZseries machines > 19-03-2013

    € 1,75
  • Spring/cap steamtap universal
  • Male reduction nipple 1/8 M x 12 mm
    Male reduction nipple 1/8 M x 12 mm

    Bezzera 5302006TP

    € 2,50
  • Silicon pipe 4x7mm 1m (standard)
    Silicon pipe 4x7mm 1m (standard)

    If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter

    € 2,95
  • Spindle seal Bezzera push tap
    Spindle seal Bezzera push tap

    CONICAL SEAL ø 12x5x6 mm

    BZ 5494004

    € 2,95
  • Y-connector silicone pipe
    Y-connector silicone pipe

    Y connector for silicone hose. 5mm

    Also available in a more solid brass version.

    Bezzera 7303033

    ∙ BZ07
    ∙ BZ09
    ∙ BZ10
    ∙ Galatea Domus
    ∙ Giulia
    ∙ Hobby
    ∙ Unica

    Lelit MC532

    € 3,25
  • Closing gasket OPV Bezzera (old model)
    Closing gasket OPV Bezzera (old model)

    Closing gasket for adjustable overpressure valve of Bezzera.

    8 x 4 mm

    BE 5493001

    For Bezzera E61 machines up to 30-10-2012

    For Bezzera BZseries machines up to 19-03-2013

    € 3,75
  • Ulka thermical fuse
    Ulka thermical fuse
    € 3,95
  • Filter water tank Bezzera
    Filter water tank Bezzera

    Filter for water tank ECM Mechanika/Technika III and Bezzera

    1/4f

    7374002

    € 4,50
  • Filterholder gasket  E61 8,5mm
  • Pump self-priming bypass
    Pump self-priming bypass

    Used in many espresso machines to drain off the air. Self-priming in counter pressure conditions.

    Also available in a higher quality brass version.

    Assemble with Loxeal or PTFE Tape or with an o-ring.

    1/8m x 1/8f

    € 4,95
  • Shower E61
    Shower E61
    € 4,95
  • Micro switch E61 handle / water tank
  • Lamp green Bezzera
    Lamp green Bezzera

    7633624 BEZZERA

    Head ø 13.4 mm - hole ø 10 mm

    € 5,95
  • Lamp orange Bezzera
    Lamp orange Bezzera

    7633625 BEZZERA

    Head ø 13.4 mm - hole ø 10 mm

    € 5,95
  • Lamp green Bezzera/ECM
    Lamp green Bezzera/ECM

    7633622 BEZZERA

    ECM CLASSIKA II - ELEKTRONIKA II PROFI - MECHANIKA

    € 6,75
  • Lamp orange Bezzera/ECM
    Lamp orange Bezzera/ECM

    7633621 BEZZERA

    ECM CLASSIKA II - ELEKTRONIKA II PROFI - MECHANIKA

    € 6,75
  • Protector lever switch Bezzera
    Protector lever switch Bezzera

    Protector for lever switch,

    BZ 7372507

    ECM B7372507

    € 6,75
  • Drain valve complete
    Drain valve complete

    27,5mm for all modern E61 brew heads

    € 6,95
  • Group gasket E61 8,5mm Silicone
    Group gasket E61 8,5mm Silicone

    Silicone group gasket, longer lasting material than the standard gasket.

    For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…

    € 6,95
  • Thermostat 135 degrees  RESETABLE
    Thermostat 135 degrees RESETABLE

    M4 thread, manual resettable.

    ECM & Rocket C199901550

    ECM Heidelberg B7434009

    BZ 7434009

    € 6,95
  • Brew valve complete
    Brew valve complete

    12mm guide, for all E61 brew groups

    € 7,25
  • Empty valve 1/4 high
    Empty valve 1/4 high

    1/4 bsp (13,16mm) suitable for all espressomachines

    € 7,95
  • Handle E61 m8 walnut
    Handle E61 m8 walnut

    Beautiful elegant button for the control lever of your E61 brew group and/or for the levers of the lever tap (m8)

    We prefer to assemble the knob ourselves with Loxeal, then it fits nicely and the thread (which is tapped into…

    € 7,95
  • Adapter push tap Bezzera
    Adapter push tap Bezzera

    M14x M13

    Bezzera code: 5225416TP

    € 8,95
  • Infusion valve complete 53mm
    Infusion valve complete 53mm

    Upper guide: 13mm

    Lower guide: 26,5mm

    Total length: 53mm

    For all modern E61 brew heads, except Vibiemme

    € 9,95
  • Level probe boiler 120mm
    Level probe boiler 120mm

    The boiler level probe is an essential part for a heat exchanger machine, when the insulation it is no longer good there is a risk that the heating element will come above the water level in the boiler. The probe must also be…

    € 9,95
  • Handle Walnut M12
    Handle Walnut M12
    € 11,95
  • -21%

    Group set E61
    Group set E61

    Especially for E61 brwe group (ECM, Feama, Rocket, Vibiemme etc)

    Maintenance kit, including:

    ∙ Shower 1x
    ∙ Supplement 0,5mm 2x!
    ∙ Filterholder gasket 8mm 2x!

    € 15,85 € 12,50
  • Nut push tap Bezzera
    Nut push tap Bezzera

    nut ø 3/8 "F - height 18 mm - body ø 22 mm

    5222823CM

    € 12,50
  • Lever switch 4 poles 15 A
    Lever switch 4 poles 15 A

    4 poles 15 amp

    For Vibiemme, Isomac, Ascaso, QuickMill 3000, Francis Francis, BFC Junior, Bezzera and many others

    € 13,75
  • Lever rod modern E61
    Lever rod modern E61

    For all modern E61 brew groups

    € 13,95
  • Pipe manometer 1/8 F x M12 F 50 cm
    Pipe manometer 1/8 F x M12 F 50 cm

    Bezzera

    50cm

    1/8 F -> manometer

    M12x1 -> t-fitting

    ARCADIA (201704-Rev.06), B2000-B2006 (200604-Rev.03), B2013 (201407-Rev.00), B2013AL (201407-Rev.00), B2016 (201706-Rev.03), B4000 (200805-Rev.01), B6000 (201407-Rev.00), BZ02…

    € 13,95
  • Safety valve E61 boiler 1/2
  • Spindle Push tap Bezzera
    Spindle Push tap Bezzera

    overall length 47.5 mm
    threaded pin M4
    head ø 12x5 mmBZ 5260204DL

    € 15,50
  • Shower E61 IMS 200IM competition style
    Shower E61 IMS 200IM competition style

    IMS is the standard for baristas that participate at competition level. You can now also place this shower in your E61 brew group. The surface is extremely smooth and the holes are perfectly distributed. An improved water…

    € 15,95
  • Pressure switch 16 ampère 1/4
    Pressure switch 16 ampère 1/4

    Thread 1/4.

    PRESSURE SWITCH XP110 0,5-1,5 BAR G1/4

    Adjust. press. range 0,5-1,5 BAR, pre-adjust. 1 Bar. 125°C, G1/4, 16A 250VAC.

    There is also a more solid alternative

    € 19,95
  • -18%

    Overhaul kit E61 brew group (gaskets)
    Overhaul kit E61 brew group (gaskets)

    Kit for complete overhaul E61 brew group:

    ∙ Shower
    ∙ Supplement 0,5mm
    ∙ Filterholder gasket 8mm
    ∙ Valve gasket 3x
    ∙ Ring 1
    ∙ Ring 2 3x
    ∙ Ring 3
    ∙ Ring 4
    ∙ Group thread
    ∙ Rubber lever rod 2x

    € 24,95 € 20,50
  • Manometer boiler 1/8m 39mm (Bezzera)
  • Manometer Pump 1/8m 39mm (Bezzera)
  • Manometer E61 brew group White
    Manometer E61 brew group White

    Upgrade your E61 brew group with this beautifull manometer. You can use the m6 tread on the front of you group, use tape of loxeal to avoid leaking. Ideal for espresso machines without a pump pressure manometer.

    5530011

    Pay…

    € 21,95
  • Collector watertank ECM / Bezzera
    Collector watertank ECM / Bezzera

    Bezzera E61 models and ECM Mechanika/Technika III

    5225228 and 7826206

    € 22,95
  • Solenoid valve 2 way OLAB
    Solenoid valve 2 way OLAB

    2x 1/8 bsp F

    220/230v

    € 23,95
  • Manometer E61 brew group Black
    Manometer E61 brew group Black

    Upgrade your E61 brew group with this beautifull manometer. You can use the m6 tread on the front of you group, use tape of loxeal to avoid leaking. Ideal for espresso machines without a pump pressure manometer.

    5530011

    Pay…

    € 24,95
  • Steam pipe Bezzera
    Steam pipe Bezzera

    Bezzera BZ07, BZ09, BZ10, BZ13, BZ16,BZ40, GIULIA, MAGICA, MITICA, STREGA, UNICA

    € 24,95
  • Handle Bezzera
    Handle Bezzera

    M12 bold

    5978508 BEZZERA
    5978508.01 BEZZERA

    € 25,75
  • Pipe boiler-water tap Bezzera/ECMIII
    Pipe boiler-water tap Bezzera/ECMIII

    Bezzera E61 or ECM Mechanika/Technika III espressomachine.

    5162233LL

    € 26,95
  • Connection watertank Bezzera / ECM
  • Naked filterholder E61
    Naked filterholder E61

    Get the best shots from your espresso machine with this naked filterholder (open filter holder) Use this in combination with the standard supplied 21 gram filter and see how the crema comes out the filter. In addition, the naked…

    € 29,95
  • -14%

    Pump Ulka EX5 230volt
    Pump Ulka EX5 230volt
    € 34,95 € 29,95
  • Shower IMS E61 Matrix
    Shower IMS E61 Matrix

    The MATRIX® shower is made of 316L s.steel plate, composed of 50 layers of micro pheres, creating tens of thousand of routes, as narrow as 4-5 microns. This allows a homogeneous distribution of the water on the coffee disk. The…

    € 32,95
  • PID Temp probe 1/4 Inox
    PID Temp probe 1/4 Inox

    Probe ø 6x25 mm - Thread ø 1/4"M bsp

    For Bezzera, Izzo/myWay, Rocket, ECM, San Remo, Lelit ea.

    A199904679 Rocket
    ELETSONTEMPII Vibiemme (VBM)
    ELETSONTEMPPI Vibiemme (VBM)

    € 36,75
  • Relay Bezzera
    Relay Bezzera
    € 37,95
  • Heating element 32mm 1250 watt with gasket
    Heating element 32mm 1250 watt with gasket

    Thread: 32 x 1,5 mm
    Length: 160 mm
    220/240 volt

    1250/1450 watt

    For Bezzera E61 and BZ machines and ECM Technika/Mechanika 3

    Bezzera code 5722240TP

    € 39,50
  • Adjustable over pressure valve (OPV) Bezzera & ECMIII
    Adjustable over pressure valve (OPV) Bezzera & ECMIII

    OPV and non return valve included, for Bezzera and ECM 3rd generation

    5965212.01AL

    € 47,95
  • Water tank Bezzera / ECM
  • -27%

    Overhaul kit E61 brew group (complete)
    Overhaul kit E61 brew group (complete)

    Kit for complete overhaul E61 brew group:

    ∙ Shower standard, Shower IMS IM200 or Shower IMS Matrix
    ∙ Supplement 0,5mm
    ∙ Group gasket 8mm standard or group gasket 8,5mm silicone
    ∙ Ring 1
    ∙ Ring 2 3x
    ∙ Ring 3
    ∙ O-ring…

    € 89,95 € 65,95
  • Heat Exchanger Bezzera Magica/Mitica
    Heat Exchanger Bezzera Magica/Mitica

    For Bezzera Magica, Mitica, Strega and other E61 models. Also suitable for ECM machines made by Bezzera

    5329020DC-AL

    connection ø 1 "M
    3 connections ø 1/8 "F
    immersion depth 147 mm
    overall length 158 mm
    brass body ø 28 mm

    € 79,95
  • Steam tap "push" Bezzera
    Steam tap "push" Bezzera

    This allows you to convert your Bezzera from the normal steam / water taps to the so-called push taps. By operating the levers you immediately have water or steam.

    € 79,95
  • PID Controler Bezzera
    PID Controler Bezzera

    Gicar code 9..3.00.61G02

    Bezzera code 7434017

    220volt

    € 84,95
  • Controlbox Gicar 9.1.24.20G RL30/4ESS/F
    Controlbox Gicar 9.1.24.20G RL30/4ESS/F

    ECICB7661034.0

    BZ 7661034.01

    Gicar 9.1.24.20G

    RL30/4ESS/F

    ECM Technika/Mechanika 3 and Bezzera machines

    € 92,50
  • Boiler Bezzera Magica/Mitica
    Boiler Bezzera Magica/Mitica

    Bezzera Magica, Mitica, Strega and other Bezzera E61 machines

    5320501.02BL

    € 325,00
© 2014 - 2024 D.R. Trading B.V. Webshop | sitemap | rss