Spare parts QuickMill Andreja
On this page you will find a number of specific parts for the QuickMIll Andreja, parts for the brew group can be found at the page with parts for the E61 brew group. You can also use the universal E61 products such as the filterholder and filters.
Sleeve pressure pipe QuickMillSleeve to secure the pressure hose in the pump diaphragm of QuickMill models. Self-clamping, so slide over the new pipe and then tighten. This bush is included with the QuickMills with an old model solenoid valve and also with the…
€ 0,75
Spring filterholder 58mmFor all machines with a 58mm filter (inner diameter = tamper diameter)
Replace this spring when your filters fall out the portafilter.
For E61 machines, Bezzera BZ series, QuickMill, Rancilio, Gaggia, Vibiemme, Marzocco, Cimbali…€ 0,75
O-ring steampipe universalThis ring is located at the bottom of the nut of the connection of the steam tap and fits in with many models of espresso machines. If the steam or water pipe moves stiffly, or if it leaks at the knee joint, replace this ring. We…
€ 0,95
Gasket closer steamtap UniversalClosing gasket for the steam/water tap of the universal tap, but also for La Marzocco, ECM II, Pavoni and others.
12,3X5,6MM€ 1,25
Lamp cap small green€ 1,50
Pump suport Ulka€ 1,50
Blindfilter E61€ 2,95
Silicon pipe 4x7mm 1m (standard)If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter
€ 2,95-20%
-20%
Filter 2 cup 14 grams E61FILTER BASKET 2 CUPS 14G. H.24,5 EXTERNAL RIDGE 70mm AISI 304
For all E61 and other 58mm groups like Rancilio, Bezzera, Ascaso Prof, Lelit 58mm, Nuova Simonelli, Astoria, Wega, Marzocco etc.€ 4,95 € 3,95
Filterholder gasket E61 8mm€ 4,95-29%
Handle filterholder M12€ 6,95 € 4,95
Shower E61€ 4,95
Group gasket E61 8,5mm SiliconeSilicone group gasket, longer lasting material than the standard gasket.
For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…€ 6,95
Infusion valve complete 53mmUpper guide: 13mm
Lower guide: 26,5mm
Total length: 53mm
For all modern E61 brew heads, except Vibiemme€ 9,95
Level probe boiler 120mmThe boiler level probe is an essential part for a heat exchanger machine, when the insulation it is no longer good there is a risk that the heating element will come above the water level in the boiler. The probe must also be…
€ 9,95
Safety valve E61 boiler 1/41/4 bsp (13.16mm)
2,0 bar max, suitalbe for all espressomachines€ 10,95
Handle Walnut M12€ 11,95-21%
Group set E61Especially for E61 brwe group (ECM, Feama, Rocket, Vibiemme etc)
Maintenance kit, including:
∙ Shower 1x
∙ Supplement 0,5mm 2x!
∙ Filterholder gasket 8mm 2x!€ 15,85 € 12,50
Lever switch 4 poles 15 A4 poles 15 amp
For Vibiemme, Isomac, Ascaso, QuickMill 3000, Francis Francis, BFC Junior, Bezzera and many others€ 13,75
Float water tank Quickmill E61Float for the water tank of Quickmill E61 models.
22x36mm
PL0980GA€ 14,95
Overpressure valve (OPV) 1/4 m x 7mm 8-14 barOT0980VE
0980-ANDREJA, 0981-RUBINO, 0985-AQUILA, 0995-VETRANO, 0995-VETRANO-2B, 0995-VETRANO-2B-PID, 0996-DE-ACHILLE, 0998-URAGANO, QM45, IZZO ALEX DUETTO€ 14,95
Pressure switch 16 ampère 1/4Thread 1/4.
PRESSURE SWITCH XP110 0,5-1,5 BAR G1/4
Adjust. press. range 0,5-1,5 BAR, pre-adjust. 1 Bar. 125°C, G1/4, 16A 250VAC.
There is also a more solid alternative€ 19,95
Manometer E61 brew group WhiteUpgrade your E61 brew group with this beautifull manometer. You can use the m6 tread on the front of you group, use tape of loxeal to avoid leaking. Ideal for espresso machines without a pump pressure manometer.
5530011
Pay…€ 21,95
Reed sensor reservoir QuickMillSEN0980
∙ 0975 La Certa
∙ 0980 Andreja
∙ 0980 Milano
∙ 0981 Rubino
∙ 0985 Aquila
∙ 0987 Rapida
∙ 0992 QM 67
∙ 0995 Vetrano€ 22,95
Steam pipe universal "Cold touch"Steam pipe suitable for many brands of espresso machines, including with universal steam tap, ECM, Rocket, Bezzera, etc.
The steam pipe has a teflon core, so you can no longer burn your fingers!
Steam tip 4x 1.5mm, you can mount…€ 24,50
Naked filterholder E61Get the best shots from your espresso machine with this naked filterholder (open filter holder) Use this in combination with the standard supplied 21 gram filter and see how the crema comes out the filter. In addition, the naked…
€ 29,95-14%
Pump Ulka EX5 230volt€ 34,95 € 29,95
Filterholder single E61€ 31,95
Filterholder double E61€ 33,95
Manometer QuickMill 40mm 0-16 barManometer QM 5000, but also QuickMill Carola and Silvano.
MAN05000N€ 34,95
Heating element 1 1/4" 1600 watt with gasketThread: 1 1/4" bsp
220 volt 1600 wattLengthe: 100 mm
Boiler La Piccola Cecilia
RDL Italia Maxi serie
Vibiemme Domobar Junior HX (Not Dual Boiler)€ 37,95
Steam/water tap "lever"This allows you to switch your espresso machine from the normal steam/water taps to the so-called push or lever taps. By operating the handles you have instant water or steam. Suitable for mounting on your existing…
€ 49,95
Watertank QuickMill E61970-ALEXIA-EVO, 0975-LA-CERTA, 0980-ANDREJA, 0980-ANDREJA (Rev.01), 0985-AQUILA, 0987-VELOCE, 0995-VETRANO-2B, 0995-VETRANO-2B-PID, 0996-ACHILLE
197x70x274mm (lxbxh)
PL0970VA
Inc float€ 59,95-27%
Overhaul kit E61 brew group (complete)Kit for complete overhaul E61 brew group:
∙ Shower standard, Shower IMS IM200 or Shower IMS Matrix
∙ Supplement 0,5mm
∙ Group gasket 8mm standard or group gasket 8,5mm silicone
∙ Ring 1
∙ Ring 2 3x
∙ Ring 3
∙ O-ring…€ 89,95 € 65,95
Pump professional "Procon 100 lt/h" compactCompact pump for installation in semi-professional espresso machines.
Yield 100lt/h.
To be mounted on the motor with the supplied clamp, pressure adjustable.
Length from pump 60mm
We call this a Procon pump, because this is…€ 89,95
Brewing Pressure Profiling Control E61 brew group"Brewing Pressure Profiling Control "(BPPC) is the latest innovation for the E61 brew group. With this upgrade you can easily adjust the extraction pressure while brewing the espresso. BPPC ensures that you can achieve an even…
€ 134,95
Motor pump RPM standard 150 watt150 Watt on mounting plate, for professional machines with internal pump. Or for semi professional machines to place outside the machine.
Sizes including compact pump head:
24 cm x 12,5 cm
Height including condenser: 15…€ 154,95
