Spare parts QuickMill 810 ground coffee
Spare parts for the QuickMill 810 which is adapted from ESE servings to ground coffee usage (2 ears filterholder)
Shim 0,5mm QuickMillYour brew group and filter holder wear slowly, so that the filter holder is no longer in line with the machine. With these shims you can ensure that the filter holder comes out nicely in line with the machine. Suitable for…
€ 0,50
Screw brew head QuickMillAll QuickMill models, both ESE and ground coffee M4x8 stainless steel to fix the brew head to the housing.
VII26€ 0,75
Sleeve pressure pipe QuickMillSleeve to secure the pressure hose in the pump diaphragm of QuickMill models. Self-clamping, so slide over the new pipe and then tighten. This bush is included with the QuickMills with an old model solenoid valve and also with the…
€ 0,75
Spring filterholder 57mmFor all machines with a 57 mm filter (inner diameter = tamper diameter)
Replace this spring when your filters fall out the portafilter.
For Ascaso, QuickMill 810 ground coffee, Francis Francis, Pavoni, Lelit, Bugatti€ 1,25
Lubricant for filter holder (Portion)With this special Molicote paste you lubricate your filter holder and group. Put the past under the ears of the filter holder and then you turn the filter holder into the brew group so that paste also comes in the tread. The paste…
€ 1,50
Pump suport Ulka€ 1,50
Water block QuickMillWaterstop for all QuickMill models. The water stop ensures that no coffee can flow back into the thermoblock, so it is important that this part is present in your machine.
SPCHI2X9€ 1,95
Filter sunction hosePrevents dirt in the machine, no limescale filtration. Suitable for hose 4x7 and 5x8
QuickMill PL0950FI
Lelit MC042€ 2,75
O-ring pressure hose / brew group QuickMill (set of 2)Set of o-rings for sealing the pressure hose in the brew group for the QuickMill 800, 2000 and 3000 series. Viton suitable for steam temperatures. (Note when replacing: there are 2 in the group)
OR103V 2x
Also for the pressure…€ 2,95
Silicon pipe 4x7mm 1m (standard)If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter
€ 2,95
Steam pipe grip QuickMillWith this handle you can turn the steam pipe in and out without burning your fingers!
€ 2,95
Safety thermostat 167 degreesIncludes 2 sockets for mounting the thermostat to the wiring.
FU0800
We also have any new insulation available.€ 3,95
Clamp bracket pressure hose QuickmillClamp bracket to attach the pressure hose to the brew head for all models, with the exception of E61 and fully automatic machines.
AC0900CB€ 4,95
Lamp QuickMill220/230v
SE0825A
SE03000
For the older versions of the 800 and 3000 series with a larger bulb (hole diameter 10mm)€ 4,95
On / Off switch universalMain swicht for espressomachine, for example QuickMill 800 series, La Piccola Cecilia, La Scala, Expobar and many others. 4 fastons
Wiht internal light€ 4,95
Purifier standardThe ideal way to reduce limescale in your machine. Suitable for all types of espresso machines with a hose in the water tank.
This purifier, is filled with resin granules and works according to ion exchange.
The standard…€ 5,95
Shower Quickmill ground coffeeFor all QuickMill machines for ground coffee (including 'converted' machines)
AC0900DO
- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill…€ 5,95
Foots espressomachine (set of 4)Set of 4 suitable for almost all espresso machines. We recommend attaching them with super glue or super glue for optimal attachment.
d.22mm
h.10mmQuickMill GO03000PFN€ 6,50
Overhaul kit steam pipe QuickMillIncluding:
2x O-ring spindle
2x O-ring steam pipeFor series steam pipe with 1 O-ring in the spindle and also for series that have 2 O-rings in the spindle.
The kit is without the valve, in most cases is it not necessary to…€ 6,75
Coffee switch QuickMill 800 seriesWith coffee cup print, 6 pin connection, also usable for 4 pin situations. For example for QuickMill, La Piccola and many others,
QM code: IN0810PC€ 6,95
Filter 1 cup QuickMill 810 for ground coffeeAC0500FI1
Especially for QM810 machines which are transformed for the use of Pods to ground coffee.
810, 2810, 3010, 3012 and 3014€ 6,95
Filter 2 cup QuickMill 810 for ground coffeeAC0500FI2
Especially for QM810 machines which are transformed for the use of Pods to ground coffee.
810, 2810, 3010, 3012 and 3014€ 6,95
Handle filter holder m1010mm thread, nice shiny finish. Suitable for many brands of espresso machine, such as QM ESE, Vibiemme, Lelit, Franis Francis and others.
We recommend that you always check the thread size of your handle before ordering.€ 6,95
Piston ring QuickMill 810 ground coffeeEspecially for QM810 machines which are transformed for the use of Pods to ground coffee.
QUICKMILL 810, 2810, 3010, 3012 and 3014
71,50 x 55 x 4
GO500GS€ 6,95
Shower Quickmill "Premium style"Improved version for the QuickMill ground coffee machine. The holes are much nicer distributed and the surface is even smoother. Another advantage is that the shower is a little less high, so you can dose just a little more. For…
€ 6,95
Pressure pipe Quickmill (steam tap - brew head)Hose between brew group and steam tap 800, 2800 and 3000 series.
Note: do not forget to order the 2 o-rings, these must be replaced in the brew groep!
L 140mm
TU0820RSR / TU03035RSDE€ 7,75
Disk QuickMill 810 for ground coffeeAL0810DDF
Especially for QM810 machines which are transformed for the use of Pods to ground coffee.
QuickMill: 810, 2810, 3010, 3012 and 3014€ 7,95
Mounting bracketBracket to attach the steam pipe to the brew head of all new models with Quickmill group.
Height 58mm, could be lower for olders models 800 series.
FE0900SRN€ 7,95
Group thread QuickMill 810 for ground coffeeEspecially for QM810/3010 machines which are transformed for the use of Pods to ground coffee.
Length total: 22mm
Length thread: 14mm
OT0810SD€ 8,95
Pressure pipe (pump-solenoid) QuickMill 820/810Pressure pipe between the pump membrane and the solenoid valve of the QuickMill 810 and 820.
A new sleeve must be mounted on the side of the pump membrane: OT0800OV
On the solenoid valve side, this pipe can be secured with the…€ 8,95
Steam pipe replacementDefective steam tap, but you never use it? With this coupling you can omit the steam tap, especially for the 800 series. When discontinuing the 3000 series, you must also order a new pressure hose, as the already mounted hose is…
€ 11,95
Thermostat QuickMill 105 degreesQM. 105 degrees, for older models with grey thermoblock.
TE0900C€ 12,95- Thermostat QuickMill 110 degrees
QM. 110 degrees for modern models (>-`04)
TE0900CR/TE0820CR€ 12,95 
Solenoid ODE / OLAB / BERGAMO / SIRAI22x29x28mm diameter 10mm
For:
ODE LBA 5W
OLAB 6000 and 9000 series
SIRAI ZB12A
BERGAMO€ 17,50
Grid QuickMill 800 series€ 18,95
Filter IMS competition style 14/16 gram 57mm groupIMS is the standard for baristas who participate at competition level. You can now also place this filter in your filterholder at home. The surface is extremely smooth and the holes are perfectly distributed. Improved water and…
€ 19,50
Cover QuickMill 800 series€ 19,95
Pulsor pump (QuickMill)Expansion valve / membrane for the pump of the QuickMill, but can also be used for other machines. The advantage of the membrane is that it gives some back pressure to the pump, making it a bit quieter. Connection to pump 1/8bsp…
€ 19,95
Solenoid valve 3 way smallStandard 3 way valve for home espresso machines.
2x connection 1/8 F and 1x 7mm hose 220volt
Tip for mounting: connection no. 1 is always on the thermoblock connection.
Replaces valves from:
ODE LBA
OLAB 6000 and 9000…€ 24,95-17%
Water tank Quickmill800, 2000, 3000 and 4000 serie
PL0925RE
156x96x156mm
Not for old model 2820 and 2835€ 29,95 € 24,95
OPV kit 9 bar QuickMill 820A nice upgrade for the QuickMill 820!
By installing this OPV (overpressure valve), the pump pressure is limited to a maximum of 9 bar, otherwise the ULKA pumps go up to 16 bar. The OPV has a fixed pressure of 9 bar.
Method:
-…€ 25,95
Steampipe QuickMill 800 seriesIf the tab on the top of the steam pipe is worn, you can replace this pipe. The model is from the 800 and 2800 series models. We recommend fitting the pipe with heat-resistant grease and do not forget to replace the orings of the…
€ 26,95
Bottom QuickMill 800 serie black€ 27,95-14%
Pump Ulka EX5 230volt€ 34,95 € 29,95-15%
Overhaul kit QuickMill (converted to ground coffee)Overhaul kit for the QuickMill 810, 3010, 3012 en 3014 which is adapted from ESE servings to ground coffee usage (2 ears filterholder) Not suitable for standard QuickMill machines for ground coffee!
Including:
Disk QuickMill 810…€ 37,75 € 31,95
Brew head QuickMill ESE Pods (810, 3012, 3012)For QuickMill ESE: 810, 3010, 3012 and 3014
AL0810GPL€ 59,95
Conversion kit QuickMill 810 pod to ground coffeeConversion kit for the QuickMill 810, 3010, 3012 and 3014 to adapted from ESE servings to ground coffee usage (2 ears filterholder) Not suitable for standard QuickMill machines for ground coffee!
Including:
∙ Disk QuickMill…€ 69,50
Heating element QuickMill 800/2000/3000 serie220 volt
AL0900SCL
- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill Cassiopeia (3004)
- Quick Mill…€ 139,95
