Spare parts QuickMill 3035

All QuickMill models, ESE and ground coffee M5x10

VIB93

QuickMill M5x8

VIB193

All QuickMill models, both ESE and ground coffee M4x8 stainless steel to fix the brew head to the housing.

VII26

Screw for fixing the lid/heating plate of the QuickMill 3000 series.

2,9 x 13 mm RVS

VII23

All models QuickMill mill, for securing the grinding blades

VI40

Sleeve to secure the pressure hose in the pump diaphragm of QuickMill models. Self-clamping, so slide over the new pipe and then tighten. This bush is included with the QuickMills with an old model solenoid valve and also with the…

For all machines with a 58mm filter (inner diameter = tamper diameter)

Replace this spring when your filters fall out the portafilter.

For E61 machines, Bezzera BZ series, QuickMill, Rancilio, Gaggia, Vibiemme, Marzocco, Cimbali…

Clamp which you slide over the housing and through which the screw of the lid/heating plate of the QuickMill 3000 series passes.

MO0825CS

Angled coupling for an Ulka pump or output of a solenoid valve or OPV.

Lelit MC017

QuickMill GO3000PG

VIB119

M5x20

20 cm

PLGEGIALLO

1/8 BSP

OT07000RP

O-ring between brass or inox disk and brew head.

OR3024-BS

Spring for the Quikmill espresso machines for ground coffee

Length 18mm

MO0900GE

Waterstop for all QuickMill models. The water stop ensures that no coffee can flow back into the thermoblock, so it is important that this part is present in your machine.

SPCHI2X9

Prevents dirt in the machine, no limescale filtration. Suitable for hose 4x7 and 5x8

QuickMill PL0950FI

Lelit MC042

GO03000VA EPDM

Set of o-rings for sealing the pressure hose in the brew group for the QuickMill 800, 2000 and 3000 series. Viton suitable for steam temperatures. (Note when replacing: there are 2 in the group)

OR103V 2x

Also for the pressure…

If you choose several meters, we will deliver that as in 1 piece. For example, 3x1 meter is supplied as a piece of 3 meter

With this handle you can turn the steam pipe in and out without burning your fingers!

3/8" (16,66mm), Length 29mm

PL0900MV

Filter for the suction hose of the QuickMill 3000 series or for the ECM and Rocket Giotto / Cellini and many other types 6mm, suitable for the 4x7mm and 5x9mm silicone hoses Prevents dirt in the machine, no lime filtration.

Includes 2 sockets for mounting the thermostat to the wiring.

FU0800

We also have any new insulation available.

Rubber that goes around the edge of the bean container hole in the lid/warming plate of the QuickMill 2835 and 3035 series.

GO03035PT

3/8g thread

Clamp bracket to attach the pressure hose to the brew head for all models, with the exception of E61 and fully automatic machines.

AC0900CB

220/230v

SE0825A

SE03000

For the older versions of the 800 and 3000 series with a larger bulb (hole diameter 10mm)

SE05000V

SE05000

QuickMill 820, 835, 2820, 2835, 3000, 3002 and 3035

For all QuickMill machines for ground coffee (except machines designed for PODS (filter holder has 2 "lips" instead of normal 3)

Material: Viton. Suitable for higher…

The ideal way to reduce limescale in your machine. Suitable for all types of espresso machines with a hose in the water tank.

This purifier, is filled with resin granules and works according to ion exchange.

The standard…

For all QuickMill machines for ground coffee (including 'converted' machines)

AC0900DO

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill…

OT0520SL

Set of 4 suitable for almost all espresso machines. We recommend attaching them with super glue or super glue for optimal attachment.

d.22mm
h.10mmQuickMill GO03000PFN

Including:

2x O-ring spindle
2x O-ring steam pipeFor series steam pipe with 1 O-ring in the spindle and also for series that have 2 O-rings in the spindle.

The kit is without the valve, in most cases is it not necessary to…

For all QuickMill ground coffee machines (except converted machines with a filterholder with 2 "lips") A stainless steel variant is also available

AL0900DDF

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill…

Improved version for the QuickMill ground coffee machine. The holes are much nicer distributed and the surface is even smoother. Another advantage is that the shower is a little less high, so you can dose just a little more. For…

Hose between brew group and steam tap 800, 2800 and 3000 series.

Note: do not forget to order the 2 o-rings, these must be replaced in the brew groep!

L 140mm

TU0820RSR / TU03035RSDE

OT0900SD

Modern version with flat upperside

M6x1

Total length: 16,6mm

Length thread:11mm

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick…

Bracket to attach the steam pipe to the brew head of all new models with Quickmill group.

Height 58mm, could be lower for olders models 800 series.

FE0900SRN

Pipe for manometers. 120cm, extra long so that it better dampens the vibration of the pump. Adaptable to any situation. (additional roll-up or un-roll)

2x 1/8F

For the old 3000 series (brushed stainless steel) for activating the grinder (3035) or for activating the pump (3002 Dosamatic)

With the QuickMill 5000, this switch is for 1 and 2 cups of coffee and hot water.

This Push (or…

Older 3000 series On/off, steam or coffee.

QuickMill 5000 On/off or steam

Quickmill IN05000

Mounting hole 35x12mm

Rubber sealing that goes around the edge of the QuickMill 3000 series lid/hot plate. Length is for a 3035, but also suitable for the 3000/3002/3004

GO03035CS

QuickMill ground coffee

Depth 23mm

AC0800FI2

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill…

AC0800FI1

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill Cassiopeia (3004)
- Quick Mill Pegaso…

QuickMill ground coffee

Depth 25mm

AC0800FI2M

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill…

This filter ensures that you can also use ESE servings in your QuickMill for ground coffee, the shape is better for ESE than the standard 1-cup filter basket for ground coffee. Just a little easier sometimes, but the result is…

For QM 2820, 2835, 3000 and 5000 series.

Please note that older QuickMill machines have a safety holder that is secured with screws, but unfortunately we no longer have this.

CON/CI10

For Euro cuttings and 2 fuses…

Defective steam tap, but you never use it? With this coupling you can omit the steam tap, especially for the 800 series. When discontinuing the 3000 series, you must also order a new pressure hose, as the already mounted hose is…

QM. 110 degrees for modern models (>-`04)

TE0900CR/TE0820CR

QM 135 degrees

TE0900V

4 poles 15 amp

For Vibiemme, Isomac, Ascaso, QuickMill 3000, Francis Francis, BFC Junior, Bezzera and many others

Knon for the timer of the QM3000 series. For the 3002 and 3012 dosamatic as well as the 2835, 3035 and 835 Retro. Includes screw to secure the knob.

PL03035MR

22x29x28mm diameter 10mm

5VA/5W 230V

For:

ODE LBA 5W
OLAB 6000 and 9000 series
SIRAI ZB12A
BERGAMO

Podmeter for the QM3000 series. For both the 3002 and 3012 dosamatic and the 0835/2835/3035 mill dosing. With wiring and plug so that it can be plugged into the printed circuit board.

PCPOT / PC3002

Expansion valve / membrane for the pump of the QuickMill, but can also be used for other machines. The advantage of the membrane is that it gives some back pressure to the pump, making it a bit quieter. Connection to pump 1/8bsp…

Pulse switch for the QM3000 series. For both the 3002 and 3012 dosamatic coffee activation and the 3035 grinder activation. Also for the 835 Retro .

IN0970P

A nice upgrade for the QuickMill 3000 series (3000, 3002 and 3035 with pressure gauge, no addition for ESE machines)

By mounting this OPV (overpressure valve) you can adjust the pump pressure to a maximum of 9 bar, otherwise the…

We have developed an improved version of the aluminum versio! This adapter disc is made of INOX and will not show any corrosion and gives a better temperature . The price is also much more interesting compared to the stainless…

AC01000AP
- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill Cassiopeia (3004)
- Quick Mill Pegaso (3035)
-…

Standard 3 way valve for home espresso machines.

2x connection 1/8 F and 1x 7mm hose 220volt

Tip for mounting: connection no. 1 is always on the thermoblock connection.

Replaces valves from:

ODE LBA
OLAB 6000 and 9000…

If the tab on the top of the steam pipe is worn, you can replace this pipe. The model is from the 3000 series. We recommend fitting the pipe with heat-resistant grease and do not forget to replace the orings of the…

43x26x7mm 3 holes RH

FE023MA

QuickMill 2835/3035/0835/060/031

MAN3035

Brass filter holder for QuickMill group with single spout

OT0800PFC1

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en…

Brass filter holder for QuickMill group with double spout

OT0800PFC

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en…

Version of the EVO70 series with stainless steel pipe and 1 hole steam tip. The pipe is double-walled so that it does not get so hot and the milk does not burn the pipe.

This upgrade can be mounted in your 2800 or 3000 series…

AL0900GPL

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill Cassiopeia (3004)
- Quick Mill Pegaso…

OT03000RL

Mot0835

MOT0835FI-R

220-230V DC

Complete circuit board for the QuickMill with built-in grinder.

From 2020, a new type of printed circuit board will be delivered that is also used in the Evo series, it is interchangeable. For the older 835 with a button for 1 or…

220 volt

AL0900SCL

- Quick Mill Stretta (0820)
- Quick Mill Retro (0835)
- Quick Mill Superiore Steel (2820)
- Quick Mill Superiore Profi (2835)
- Quick Mill Orione (3000 en 3002)
- Quick Mill Cassiopeia (3004)
- Quick Mill…