Spare parts E61 Brew group
- Brass washer valve€ 0,45
- Hexagon bolt E61 group€ 0,65
- 1mm GASKET SUPPLEMENT€ 0,75
- O-ring upper pipe FAEMA E61
For original Feama group ((E61 and Legend), Wega and Futurmat. For modern E61 group you need this o-ring https://www.drtradingshop.nl/en_GB/a-50762353/spare-parts-e61-brew-group/o-ring-upper-pipe-modern-e61/#description
18,65 x…€ 0,75 - Valve gasket E61€ 0,75
- Discharge valve E61€ 1,00
- Guide infusion valve€ 1,45
- Filter E61€ 1,50
- Lubricant for filter holder (Portion)
With this special Molicote paste you lubricate your filter holder and group. Put the past under the ears of the filter holder and then you turn the filter holder into the brew group so that paste also comes in the tread. The paste…
€ 1,50 - Valve guide 12mm€ 1,50
- Valve guide FAEMA 6,5mm€ 1,50
- Brew valve guide€ 1,75
- Valve guide 11mm€ 1,75
- Valve guide 13mm€ 1,75
- Injector 0,6mm€ 1,95
- Injector 0,8mm€ 1,95
- Rubber lever rod (set of 2)€ 1,95
- Valve body€ 1,95
- Jet E61 Brew head 3,5mm Teflon
Place this yet in the top pipe between the heat exchanger and the group if the brew group gets too hot. Due to the reduction of the flow in the heat exchanger, the group becomes slightly less hot.
Diameter 9.6mm / 14mm€ 2,00 - Chromer mushroom cap€ 2,25
- Discharge valve E61 short€ 2,35
- Jet E61 Brew head 2mm€ 2,50
- Jet E61 Brew head 4mm
Place this yet in the top pipe between the heat exchanger and the group if the brew group gets too hot. Due to the reduction of the flow in the heat exchanger, the group becomes slightly less hot.
Diameter 10mm / 12mm€ 2,50 - Lever rod guide€ 2,95
- Upper pipe gasket Vibiemme€ 2,95
- Command handle E61 m8€ 3,75
- Grease high temperature 6 gram
Serving to lubricate the rubber of the control of eg. your E61 lever rod. Enough for one-time use, high quality heat resistant and food safe. Also ideal for lubricating different types of steam valves and knee joints of steam…
€ 3,95 - Group thread E61€ 3,95
- Filterholder gasket E61 9mm€ 4,95
- Filterholder gasket E61 10mm€ 4,95
- Filterholder gasket E61 8mm€ 4,95
- Shower E61€ 4,95
- Filterholder gasket E61 8mm Silicone
Silicone group gasket, longer lasting material than the standard gasket.
For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…€ 6,95 - Group gasket E61 8,5mm Silicone
Silicone group gasket, longer lasting material than the standard gasket.
For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…€ 6,95 - Group gasket E61 9mm Silicone
Silicone group gasket, longer lasting material than the standard gasket.
For the brewing group of very many different machines: Including everything with an E61 brew group: ECM, Faema, Rocket, Vibiemme, Wega, Bezerra, Kees van…€ 6,95 - Nut for lever collector E61€ 7,25
- Handle E61 m8 walnut
Beautiful elegant button for the control lever of your E61 brew group and/or for the levers of the lever tap (m8)
€ 7,95 - Infusion valve complete 53mm
Upper guide: 13mm
Lower guide: 26,5mm
Total length: 53mm
For all modern E61 brew heads, except Vibiemme€ 9,95 - Lever Rod Faema E61
Suitable for original Faema E61 brew group, for modern groups we recommend you to purchase the modern lever rod.
€ 9,95 - Infusion valve complete Vibiemme 61mm
Upper guide: 13mm
Large guide: 35mm
total length 61mm
Suits VBM E61 brew heads€ 10,95 -21%
Group set E61Especially for E61 brwe group (ECM, Feama, Rocket, Vibiemme etc)
Maintenance kit, including:
∙ Shower 1x
∙ Supplement 0,5mm 2x!
∙ Filterholder gasket 8mm 2x!€ 15,85 € 12,50- Lever collector E61€ 14,50
- Shower E61 IMS 200IM competition style
IMS is the standard for baristas that participate at competition level. You can now also place this shower in your E61 brew group. The surface is extremely smooth and the holes are perfectly distributed. An improved water…
€ 15,95 -18%
Overhaul kit E61 brew group (gaskets)Kit for complete overhaul E61 brew group:
∙ Shower
∙ Supplement 0,5mm
∙ Filterholder gasket 8mm
∙ Valve gasket 3x
∙ Ring 1
∙ Ring 2 3x
∙ Ring 3
∙ Ring 4
∙ Group thread
∙ Rubber lever rod 2x€ 24,95 € 20,50- Manometer E61 brew group White
Upgrade your E61 brew group with this beautifull manometer. You can use the m6 tread on the front of you group, use tape of loxeal to avoid leaking. Ideal for espresso machines without a pump pressure manometer.
5530011
Pay…€ 21,95 - Lever handle E61€ 22,95
- Manometer E61 brew group Black
Upgrade your E61 brew group with this beautifull manometer. You can use the m6 tread on the front of you group, use tape of loxeal to avoid leaking. Ideal for espresso machines without a pump pressure manometer.
5530011
Pay…€ 24,95 - Upper pipe€ 26,95
- Shower IMS E61 Matrix
The MATRIX® shower is made of 316L s.steel plate, composed of 50 layers of micro pheres, creating tens of thousand of routes, as narrow as 4-5 microns. This allows a homogeneous distribution of the water on the coffee disk. The…
€ 32,95 -27%
Overhaul kit E61 brew group (complete)Kit for complete overhaul E61 brew group:
∙ Shower standard, Shower IMS IM200 or Shower IMS Matrix
∙ Supplement 0,5mm
∙ Group gasket 8mm standard or group gasket 8,5mm silicone
∙ Ring 1
∙ Ring 2 3x
∙ Ring 3
∙ O-ring…€ 89,95 € 65,95-27%
Overhaul kit E61 brew group VIBIEMME (complete)Kit for complete overhaul Vibiemme E61 brew group:
∙ Shower standard, Shower IMS IM200 or Shower IMS Matrix
∙ Supplement 0,5mm
∙ Filterholder gasket 8mm or group gasket 8,5mm silicone
∙ Ring 1
∙ Ring 2 3x
∙ Ring 3
∙…€ 94,95 € 68,95- Brewing Pressure Profiling Control E61 brew group
"Brewing Pressure Profiling Control "(BPPC) is the latest innovation for the E61 brew group. With this upgrade you can easily adjust the extraction pressure while brewing the espresso. BPPC ensures that you can achieve an even…
€ 134,95 - E61 brew group complete€ 199,95