Pumps
Pump bendAngled coupling for an Ulka pump or output of a solenoid valve or OPV.
Lelit MC017
QuickMill GO3000PG€ 0,95
Pump suport Ulka€ 1,25
Pump suport Ulka€ 1,50
Rubber support rotary pump M6Rubber to mount the engine for a rotary pump in the machine.
20 x 20 x M6 x 16MM€ 1,95
Ulka thermical fuse€ 3,95
Pump self-priming bypassUsed in many espresso machines to drain off the air. Self-priming in counter pressure conditions.
Also available in a higher quality brass version.
Assemble with Loxeal or PTFE Tape or with an o-ring.
1/8m x 1/8f€ 4,95
Condenser 10 mf€ 6,95
Condenser 12,5 mf€ 6,95
Condenser 16mfMacap M7-900, M7-A-900, M7-K, M7-K-A, M7-K-T, M7T900, MX SERIES 1400RPM, MX SERIES 900RPM, MX-1400, R7AP, R9AP
Mazzer: MAJOR, ROBUR, ROYAL, STARK
Obel Mito, Marzocco, Cimbali ea.€ 6,95
Condenser 5mf€ 6,95
Condenser 6,3 mf€ 6,95
Condensor 20mfMacap M7, M7-1400, M7-1400 (200501-), M7-900, M7-A-T-P (200110-), MXD-Xtreme, MX-K, R7AP, R7AP (200110-), R9AP
Mazzer: MAJOR, ROBUR, ROYAL, STARK
Fiorenzato: DOGE63, DOGE83
The ramp capacitor has 2 bridged connections (so 4…€ 6,95
Ulka pump connection€ 7,25
Overpressure valve (OPV) 1/8 m x 7mm 9 barFitting 1/8 m and 5x8mm silicone pipe.
9 BAR
Length 49 mm, diameter 17mm€ 12,95
Pump bypass / primer brassreplacement for Expobar primer and also for standard plastic primer. 1/8Mx1/8F1/8Mx1/8F
€ 12,95
Pulsor pump (QuickMill)Expansion valve / membrane for the pump of the QuickMill, but can also be used for other machines. The advantage of the membrane is that it gives some back pressure to the pump, making it a bit quieter. Connection to pump 1/8bsp…
€ 19,95
Pump Ulka steam€ 19,95
-14%
Pump Ulka EX4 230volt€ 34,95 € 29,95-14%
Pump Ulka EX5 230volt€ 34,95 € 29,95
Adjustable over pressure valve (OPV) Bezzera & ECMIIIOPV and non return valve included, for Bezzera and ECM 3rd generation
5965212.01AL€ 47,95
Base kit for water mainsConnect your espresso machine with vibration pump to the water supply without the risk of leaks? We have made a kit that allows you to easily connect the machine to the water supply, but with a solenoid valve between the pump and…
€ 54,95
-10%
Pump professional type "procon 200 lt/h"The pump head for professional machines. The maximum volume is 200lt / h Pressure and the pressure is adjustable. The pump comes with a mounting clamp.
We call this a Procon pump because it is the best known brand. However, this…€ 99,95 € 89,95
Pump professional "Procon 100 lt/h" compactCompact pump for installation in semi-professional espresso machines.
Yield 100lt/h.
To be mounted on the motor with the supplied clamp, pressure adjustable.
Length from pump 60mm
We call this a Procon pump, because this is…€ 94,95
Pump professional Faema/Cimbali 150 lt/h"The pump head for Faema E61 Jubilee of Legend, among others, with mounting with bolts on the motor. 150lt / h and the pressure is adjustable. Narrow shaft, suitable for 35mm transmission
Asadio (DIECIA, DIECIS), Cimbali…€ 99,95
Motor pump RPM standard 150 watt150 Watt on mounting plate, for professional machines with internal pump. Or for semi professional machines to place outside the machine.
Sizes including compact pump head:
24 cm x 12,5 cm
Height including condenser: 15…€ 154,95
Motor pump RPM 300 wattHeavy motor for rotary pump, the pump head can be attached with a clamp. 300 watt, for 2 group and bigger machines.
C0084.06
power supply 300W 220-230V 50/60Hz
capacitor 6 µf€ 189,95
Flowjet 5000 series pump 220 voltThe new 5000 Series Bottled Water System is designed to work with coffee/tea makers, refrigerator ice and water dispensers, espresso carts and portable sinks or any use requiring portable potable water.The 5000 Series Bottled…
€ 349,00
